Oriter rubber plastic insulation materials has used the equipment which introduced of foreign high-tech equipment,with the in-depth study , developing more superior performance rubber insulation materials. This product is no fiber dust, formaldehyde-free, without chlorofluorocarbon ( CFC ) and other ozone-depleting substances , with smaller and more even cell , having a stronger tear strength and higher flexibility . Greater extent to improve the product's performance, and achieve better environmental protection energy saving effect. This product is with a green and smooth surface which is not easy to gather dust, no smell, healthier environment.
Oriter Rubber Plastic Plate Products
Oriter Rubber Plastic Plate Products
Oriter Rubber Plastic TM5X5 Foil-clad Pipe Products
Oriter Rubber Plastic TM5X5 Foil-clad Plate Products
PRODUCT PERFORMANCE ADVANTAGES
Low conductivity factor
Oriter rubber plastic insulation materials has the lower conductivity factor , Conductivity factor of this material is 0.034w/m.k at average temperature 0℃. As this product has high surface heat liberation rate, and with smaller and more even cell ,so it is not easy to break, and can lasting hold lower thermal conductivity .Under the same external conditions, in order to achieving the same insulating effect, the thickness of using the Oriter rubber plastic insulation is relatively thin.
Good fire-blocking
Oriter rubber insulation tubes and boards has excellent fire performance , conforming the standard of GB8624-2012.Concentration of smoke produced by burning the product is low, Oriter rubber insulation is different from other insulation materials . It shall not be melted when touched with fire and no any burning balls will be fallen down. The material has self-extinguishing characteristic.
Good elasticity and Vibration resistance
Oriter Brand Rubber Plastic Heat-Insulating & Heat-preservation Material has high elasticity, can reduce the vibration and resonate of the hot/cold water pipes during using in the largest degree.
Good damp-proof property
Enlarging the images of the Oriter Rubber Plastic Insulation Material shows that completely closed-cell foam structure , greatly reduces water absorption and vapor permeability . Closed-cell foam has good moisture resistance, therefore the most purposes without additional moisture barrier.
High tear strength
Tear strength was a destruction phenomenon that caused by the rapid expansion force of cracks and cracks in the materials .Since the cell of the Oriter Rubber Plastic Insulation Material is tinier ,it is less susceptible to damage by external force, compared with ordinary rubber, greatly improving the tear strength of the product.
Other advantages
Because of this product is elastic and softness, it is easy to be installed . Oriter Rubber Plastic Insulation Material is with a green and smooth surface which is not easy to gather dust, preventing the breeding of bacteria , protecting the health of the indoor environment well . while, it is free of harmful refrigerants formula system, no smell, no formaldehyde volatile, more healthier and environmental.
PRODUCT SPECIFICATIONS
Range of specifications of tubing products
| Outer diameter of copper tube (in.) | Outer diameter of seamless tube (mm) | D N Nominal diameter of galvanized tube | Inner diameter of Xinruiflex rubber plastic (mm) | 9mm thickness (1.8m/piece) | 15mm thickness (2m/piece) | 20mm thickness (2m/piece) | 25mm thickness (2m/piece) | 30mm thickness (2m/piece) | ||||||
| Size (mm) | piece /bag | piece/ carton | Size (mm) | piece /bag | Size (mm) | piece /bag | Size (mm) | piece /bag | Size (mm) |
piece /bag |
||||
| 1/4 | 6 | 6×9 | 180 | 180 | ||||||||||
| 3/8 | 6 | 10 | 10×9 | 140 | 140 | 10×15 | 80 | 10×20 | 70 | |||||
| 1/2 | 13 | 13×9 | 120 | 100 | 13×15 | 80 | 13×20 | 50 | ||||||
| 5/8 | 14 | 8 | 16 | 16×9 | 100 | 95 | 16×15 | 60 | 16×20 | 50 | ||||
| 3/4 | 19 | 19×9 | 100 | 80 | 19×15 | 60 | 19×20 | 40 | ||||||
| 7/8 | 22 | 15 | 22 | 22×9 | 100 | 70 | 22×15 | 60 | 22×20 | 40 | 22×25 | 30 | 22×3 | 25 |
| 1 | 25 | 25 | 25×9 | 80 | 55 | 25×15 | 60 | 25×20 | 30 | 22×25 | 25 | 25×30 | 25 | |
| 11/8 | 28 | 20 | 28 | 28×9 | 60 | 50 | 28×15 | 50 | 28×20 | 30 | 28×25 | 25 | 28×3 | 20 |
| 11/4 | 28 | 32 | 32×9 | 60 | 45 | |||||||||
| 11/4 | 32 | 34 | 34×9 | 60 | 45 | 34×15 | 40 | 34×20 | 30 | 34×25 | 25 | 34×30 | 20 | |
| 13/8 | 32 | 25 | 35 | 35×9 | 60 | 40 | ||||||||
| 11/2 | 38 | 38×9 | 50 | 30 | ||||||||||
| 15/8 | 25 | 42 | 42×9 | 50 | 30 | |||||||||
| 15/8 | 32 | 43 | 43×9 | 50 | 30 | 43×15 | 30 | 43×20 | 25 | 43×25 | 20 | 43×30 | 15 | |
| 17/8 | 40 | 48 | 48×9 | 50 | 28 | 48×15 | 30 | 48×20 | 25 | 48×25 | 20 | 48×30 | 15 | |
| 21/8 | 54 | 54×9 | 50 | 25 | ||||||||||
| 23/8 | 50 | 60 | 60×9 | 50 | 20 | 60×15 | 30 | 60×20 | 20 | 60×25 | 15 | 60×30 | 15 | |
| 70 | 76 | 76×15 | 25 | 76×20 | 15 | 76×25 | 15 | 76×30 | 10 | |||||
| 80 | 89 | 89×20 | 15 | 89×25 | 15 | 89×30 | 10 | |||||||
| 108 | 108×20 | 15 | 108×25 | 10 | 108×30 | 10 | ||||||||
Planking（1.5m width）
| Thickness | 10mm | 15mm | 20mm | ||
| m/piece | 16m | 16m | 8m | ||
|
Notes：1. The above specifications are those in common use;special specifications are available at Customers’request. |
|||||
THE PRODUCT APPLICATION SCOPE
Oriter closed pore rubber materials are used for the heat-insulating and heat-preservation of shell of big tanks and piping in the construction,business and industry,heat insulation of air ducts of central air conditioners, heat insulation of joint pipes of household air conditioners and automobile air conditioners.
Oriter closed pore rubber materials are widely used in the protection of sport equipment, in cushions and diving suits.
Oriter open pore rubber materials are used in sound isolation of wall planking, sound absorption in air ducts, and sound absorbing decorations in entertainment spaces. It can also be used for shock resistance and pressure relief in instruments and equipment.
